PRESS STYLE- SURFACE MOUNT CAPACITOR & INDUCTOR TESTING
Surface Mount chip Capacitors, Inductors, or Resistors can be easily measured in SERIES-THRU, SHUNT THRU, or SHUNT TO GROUND configurations. This test system accomodates componenet sizes from 0201 to 1206. ICM "Dura" contacts are incorporated for long fixture life. De-embedding with the appropriate Calibration standards is available
Series-Thru
DC-26.5 Ghz Frequency Range
DUT is in Series with a 50 ohm line
Reference planes set at the terminals of DUT with TRL Calibration
APC-7, APC-3.5 and Super Sma
Using supplied spacers enables the fixture to measure all popular device sizes
DUT guides included for all sizes
Precision guided dielectric pusher
Changeover tools included
Shunt-Thru
DUT is between a 50 ohm line and ground
Reference planes set at terminal of DUT with TRL Calibration
DC-18 or 26.5 Ghz Frequesncy range
APC-7, APC-3.5 and Super Sma
Using supplied spacers enables the fixture to measure all popular device sizes
DUT guides included for all sizes
DURA contacts for long life
Precision guided dielectric pusher
Changeover tools included
For additional Detail on Cap/Ind configurations see Download area:
User Manual For Series-thru Test Fixture
B6140121 Introduction to Capacitor & Inductor Measurement |
| Press Style - Surface Mount Capacitor & Inductor Testing |
Click on the links below to view
Additional Products in this category
 |
|
Item Shown:
2.) Saw Filter Test Fixture
|
|
|
|
