Ph: 480-940-0740
Fax 480-961-4754

Products Overview
Adjustable Mainframe Test Fixture
Coax to Micro-Strip Transitions
Custom Designs
Do-it Yourself Fixtures
High Power Transistor Test Fixtures
Press Style - Surface Mount Capacitor & Inductor Testing
TDR Probes
Universal Substrate Test Fixture (DC-40 Ghz)
Inter-Continental Microwave
6849 West Frye Road
Chandler, AZ 85226-3307
Support Downloads

Inter-Continental currently uses a HP-8510C and/or a HP-8722 network analyzer for testing ICM fixtures and calibration kits. We do provide the cal coefficient data for the HP-8510C and HP-8722 (this format also applies to HP-8720) to our customers as needed. We understand that not all of our customers have either of these analyzers and the supplied data format is not usable. In this case, we can provide the data in written form so that the customer can input the data manually for the type of analyzer they have. We also provide written instructions for several other analyzers for inputting the cal coefficient data and provide this as needed. Unfortunately we do not have instructions for every type of analyzer available. Depending on the level of knowledge our customers have with their analyzers, this may be a challenge. According to HP, this information is provided with all analyzers in the users manual. However if the customer needs help with this, they should contact the HP representative that supports their analyzer for some technical guidance on how to input the data correctly.

Calibration Coefficients & Calibration Procedures
  • For additional Coefficients and/or Calibration Procedures pls contact the factory at sales@icmicrowave.com
  • - Agilent In Fixture Measurement Using VNA AN 1287-9
    - B6139394 Cal Ref Plane Position-Where and When to Change
    - B6139890_Cal Coeff install TOSL-300x series on HP8753ES
    - B6139891_Cal Coeff install TRL-200x series on HP8720
    - B6139892_TRL Cal Coeff install TRL-300x HP8753 series
    - B6139893_ICM TOSL-300x Cal Proc HP8753ES
    - B6140272-TOSL Cal Proc for Hi-Power Test Fixture
    - B6140341 Cal Coeff instal TRL-300x HP8720
    - B6140681 Cal Coeff Conversion from HP-8510 to PNA
    - B6141617 -TRL-3004A ICM P/N: A0105088A Cal Coefficients
    - ENA_Multiport_TRL_LRM_manual
    - ICM_Agilent_Cap_Meas_App_Note_5989-0547EN
    - Non_Coax_Meas_5091-3645E
    - TRL_Cal_with_ICM_TF_5091-1943E

    User/ Operating Manuals
  • Many additional User/Operating Manuals are available upon request.
    Please contact sales@icmicrowave.com
  • - B6138190 Attach Coax-to-Microstrip Trans to Cal Kit
    - B6140033- User Manual for Test Fixture A0134552A
    - B6141961 User Manual for Hi-Power Test Fixtures
    - User Manual For Series-thru Test Fixture
    - User Manual for Shunt-Thru Test Fixture

    Product Notes
  • Many Additional Notes and Spec Sheets are available upon request.
    Contact sales@icmicrowave.com for more!
  • - B0137207_MMIC Data Input Form
    - B0137216_FET_Data Input Form
    - B6113415-APC-3.5 Connector Pin Replacement
    - B6132298A-Pogo Pin Replacement Instructions
    - B6135702-Packaged Transistor Testing
    - B6137206-MMIC Carrier Assemblies
    - B6137223-Notes on Capacitor and Inductor Testing
    - B6138191-RF/pin Replace on Coax-to-Microstrip Trans A0138085
    - B6140121 Introduction to Capacitor & Inductor Measurement
    - How to Adjust the ICM Differential TDR Probe A0134332

    Customer Requirements Form
  • This is a short questionaire to guide you in the selection of the attributes you require for your test fixture.
  • A dimensional drawing of your DUT detailing dimensions and tolerances is required.
  • - Customer Requirements Form (CRF)

    ICM Terms and Conditions
    Terms & Conditions
    EAR/ITAR Compliance
    Calibration Coefficient Statement
    - ICM Terms & Conditions

    Specification Sheets
    Additonal Specification Sheets May be provided by the Factory
    Please contact Sales@icmicrowave.com
    - A0137761 TDR Paddle Probe
    - Hi Power Fixture Presentation
    - Hi Power Test Fixture Summary Brochure
    - Laser Transmit Modules
    - Mainframe Presentation
    - TDR Probe A0137752 Round
    - WK Universal Substrate Fixture

    Spare Parts Kits /Replacement Parts
    - NOTE: Please contact the Factory

    Home | Products Overview | Adjustable Mainframe Test Fixture | Coax to Micro-Strip Transitions | Custom Designs | Do-it Yourself Fixtures | High Power Transistor Test Fixtures | Press Style - Surface Mount Capacitor & Inductor Testing | TDR Probes | Universal Substrate Test Fixture (DC-40 Ghz) | What’s New | About ICM & CEPA
    Support Downloads | Contact Us | Site Map

    privacy policy | disclaimer
    © 2008 INTER-CONTINENTAL MICROWAVE